_ Cylinder head inspected/measured for warp valve leakage?
_ Head Bolts replace and torqued to spec?
_ Crank and camshaft bolts tight?
_ Thermostat replaced?
_ Oil and Filter replaced?
_ Coolant replaced?
_ Spark Plugs replaced?
_ Timing Belt/Chain inspected or replaced?
_ Camshaft timing confirmed manually through 2 crank rotations?
_ All fuel lines/ wiring/ etc in place and tightened?
Start engine, inspect for leaks, shut down.
_ Check coolant
_ Check oil
Restart Unit, run to operating temperature
_ Set ignition timing
_ Confirm thermostat operational
_ Re-inspect for leaks